If you purchase our JN0-664 practice materials, we believe that your life will get better and better. You may find a better job with a higher salary or your company will give you a promotion on your JN0-664 certification. So why still hesitate? Act now, join us, and buy our JN0-664 Study Materials. You will feel very happy that you will be about to change well because of our JN0-664 study guide.
The JN0-664 exam is designed for network engineers who have at least three to five years of experience working in a service provider environment. Candidates who pass the JN0-664 exam are expected to have a deep understanding of service provider routing and switching technologies and be able to troubleshoot complex network issues. They should also be proficient in configuring and managing Juniper Networks' service provider routing and switching platforms.
To earn the Juniper JN0-664 certification, candidates must pass a rigorous exam that consists of multiple-choice and simulation questions. JN0-664 Exam is designed to test the candidate's ability to design, implement, and troubleshoot complex service provider network solutions. Service Provider, Professional (JNCIP-SP) certification is intended for network professionals with at least three to five years of experience in service provider routing and switching. Service Provider, Professional (JNCIP-SP) certification provides a solid foundation for a career in service provider networking and is highly valued by employers worldwide.
They are not forced to buy one format or the other to prepare for the Service Provider, Professional (JNCIP-SP) JN0-664 exam. VCEDumps designed Juniper JN0-664 exam preparation material in Service Provider, Professional (JNCIP-SP) JN0-664 PDF and practice test. If you prefer PDF Dumps notes or practicing on the Service Provider, Professional (JNCIP-SP) JN0-664 practice test software, use either.
Juniper JN0-664 is a certification exam designed for professionals who want to demonstrate their skills and knowledge in service provider routing and switching technologies. This is a professional-level certification exam that tests the candidate's ability to implement, configure, and troubleshoot Junos OS-based service provider routing and switching platforms. The JNCIP-SP certification is intended for individuals who are experienced in the service provider domain and want to advance their career in this field.
NEW QUESTION # 50
Which two statements are correct about VPLS tunnels? (Choose two.)
Answer: C,D
Explanation:
https://www.juniper.net/documentation/us/en/software/nce/feature-guide-virtual-private-lan-service/topics/task
/vpls-ldp-signaling-solutions.html
https://www.juniper.net/documentation/us/en/software/junos/vpn-l2/topics/concept/vpns-configuring-vpls- routing-instances.html#id-11510150__id-11568648
NEW QUESTION # 51
You are asked to protect your company's customers from amplification attacks.
In this scenario, what is Juniper's recommended protection method?
Answer: A
NEW QUESTION # 52
You want to ensure that a single-area OSPF network will be loop free.
In this scenario, what are two requirements that satisfy this requirement? (Choose two.)
Answer: C,D
Explanation:
DR/BDR doesn't ensure information sharing within the domain.
NEW QUESTION # 53
Exhibit.
Referring to the exhib.t, what must be changed to establish a Level 1 adjacency between routers R1 and R2?
Answer: D
Explanation:
IS-IS routers can form Level 1 or Level 2 adjacencies depending on their configuration and network topology.
Level 1 routers are intra-area routers that share the same area address with their neighbors. Level 2 routers are inter-area routers that can connect different areas. Level 1-2 routers are both intra-area and inter-area routers that can form adjacencies with any other router.
In the exhibit, R1 and R2 are in different areas (49.0001 and 49.0002), so they cannot form a Level 1 adjacency. However, they can form a Level 2 adjacency if they are both configured as Level 1-2 routers. R1 is already configured as a Level 1-2 router, but R2 is configured as a Level 1 router only, because of the level 1 disable command under the lo0.0 interface. This command disables Level 2 routing on the loopback interface, which is used as the router ID for IS-IS.
Therefore, to establish a Level 1 adjacency between R1 and R2, the level 1 disable command under the R2 protocols isis interface lo0.0 hierarchy must be removed. This will enable Level 2 routing on R2 and allow it to form a Level 2 adjacency with R1.
NEW QUESTION # 54
You have an L2VPN connecting two CEs across a provider network. The CEs and provider network are configured with the default MTU setting. You use the ping command from one CE to the other CE with a size of 1500 bytes.
In this scenario, which statement is correct when using the ping command?
Answer: D
Explanation:
Layer 2 VPNs don't support fragmentation in the provider network. It is critical that the provider network supports the largest frame that the CE devices can generate after the MPLS and virtual routing and forwarding (VRF) labels are added by the PE devices. This example leaves the CE devices at the default 1500-byte maximum transmission unit (MTU) while configuring the provider core to support a 4000 byte MTU. This configuration avoids discards by ensuring the CE devices cannot exceed the MTU in the provider's network.
NEW QUESTION # 55
......
Valid JN0-664 Study Materials: https://www.vcedumps.com/JN0-664-examcollection.html
